AC-EC LCD FAN CONTROLLER FOR 2 FANS (2x5A)

This AC-EC fan controller with LCD display, a rotary push knob allows a very fast setting of all the values and reading of all the information’s given by the fan such as actual set speed, temperature, humidity day/night, negative pressure of the intake fan and RPM (rounds per minute) of the EC-exhaust fan. A built in light sensor in the probe recognise day/night modes. Two 5A/230V AC exits for intake and exhaust fan, in parallel you have 2xRJ45 connector and you can choose between 0-10V or PWM (pulse wide modulation) signal. 2 internal temperature sensors prevent from overheating on the heat sink and processor side. The AC-EC fan controller comes with power cable 1.5m, 4m sensor cable. It is ready to use. You can program 15 individual settings with rotary push button. Features: -Temperature day -Temperature hysteresis day -Humidity day -Humidity hysteresis day -Minimum speed day -Maximum speed day -Temperature night -Temperature hysteresis night -Humidity night -Humidity hysteresis night -Minimum speed night -Maximum speed night -Negative pressure setting -Switch sensor level -Switch over time day/night LCD display: -Graphic and digital display of speed rpm constant -Temperature display constant -Humidity display constant -Set point selectable not constant, over input keys Sizes and technical data’s: Case: WxHxD = 130x80x70mm Controller: WxHxD = 160x110x90mm Designed for: 2×1’000W Volts: 230V / 50HZ Current: 10A Digital sensor 5V Measures temperatures from –55°C to +125°C (–67°F to +257°F) 0.5°C accuracy from –10°C to +85°C humidity accuracy ±4.5%rh Protection class: IP54